Vision Trailers - Vision Slatted Livestock Trailers

Vision Trailers

Vision Slatted Livestock Trailers

Photo of a Vision slatted livestock trailer.


	Vision Series 6000 slatted livestock trailers features an all-aluminum construction with a full width swing rear door and curbside escape door for a trailer that's cost efficient and yet very strong. Available in both bumperpull and gooseneck models, these trailers comes standard with our tongue and groove floor plank and have a five year bumper to hitch warranty.

	Model	Hitch	Axles	Divider	Bed Length	Frame Width	Inside Height	Overall Length

	6012	Bumperpull	3500 lb	None	12'	7'	7'	15' 6"

	6014	Bumperpull	5200 lb	Stock Gate	14'	7'	7'	17' 6"

	6016	Bumperpull	5200 lb	Stock Gate	16'	7'	7'	19' 6"

	6116	Gooseneck	5200 lb	Stock Gate and Neck	16'	7'	7'	24'

	6118	Gooseneck	5200 lb	Stock Gate and Neck	18'	7'	7'	26'

	6120	Gooseneck	7000 lb	Stock Gate and Neck	20'	7'	7'	28'

	6122	Gooseneck	7000 lb	Stock Gate and Neck	22'	7'	7'	30'

	6124	Gooseneck	7000 lb	Stock Gate and Neck	24'	7'	7'	32'

Trailer Specifications

Nose Design

Square front or square-front vented (bumperpull models)
Tapered arrowhead nose (gooseneck models)

Construction

Vision's tongue and groove extruded wallplank tube on gooseneck nose
Baked on white enamel finish on tongue and groove wallplank tubes
8" slat on walls and doors
Exterior roof corner extrusion, mill finish
One piece aluminum roof coil
Jogless aluminum frame
Aluminum superplank floor with I-beams on 4-1/2" centers
Tear drop fenders
Three piece rubber bumper
Heavy duty wiring package and required lighting
All lighting sealed beam and shock resistant

Doors and Vents

Escape door (butterfly latch), curbside
Tie back on escape door (gooseneck models)
Full swing rear door with 33" slider and camlock
Four heavy duty hinges on rear door
Two livestock vent openings (curbside)
Two livestock vent openings (roadside)

Dividers

(On all models except 6012)

Stock gate bed divider with slam lock
Full width fold down neck divider (on gooseneck models)

Running Gear

2-5/16 bulldog coupler (bumperpull models)
Single sidewind jack (bumperpull models)
Adjustable 2-5/16 cone coupler (gooseneck models)
Single spped jack with quick drop leg (gooseneck models)
Two 3500 lb, 5200 lb, or 7000 lb axles (depends on model)
Two sets electric brakes
Four 225/75 R15 6 ply tires on silver modular rims (Model 6012)
Four 235/85 R16 8 ply tires on silver modular rims (models with 5200 lb axles)
Four 235/85 R16 10 ply tires on silver modular rims (models with 7000 lb axles)
Electric breakaway switch and battery pack

Exterior

Two amber L.E.D. clearance lights (bumperpull models)
Amber 3 bar L.E.D. clearance light mounted on front (bumperpull models)
Four amber L.E.D. clearance lights (gooseneck models except 6122 and 6124)
Six amber L.E.D. clearance lights (Model 6122 and Model 6124)
Four red L.E.D. clearance lights
3 bar red L.E.D. clearance light
License plate light
Two L.E.D. signal and tail lights
Two fender lights
7 pole plastic trailer plug
Four Vision logos

	Options

	Rear Door Options No slider on rear swing door 50/50 rear doors with removable post (instead of rear swing door) Exterior Options Single vent (instead of double vent) Vent opening on lower half of trailer Semitransparent plastic covering over vent openings Full width rubber bumper (instead of three piece bumper) Interior Lighting Options Interior spot light mounted at rear corner (with recessed single pole toggle switch mounted in rear corner post) Divider Options Stock gate bed divider with 33" slider and slam lock Additional stock gate bed divider Tire Options Spare tire with carrier

	Floor Plans and Trailer Drawings

	Model 6012 Model 6014 Model 6016 Model 6116 Model 6118 Model 6120 Model 6122 Model 6124


Copyright © 2009 2116602 Ontario Ltd. O/A Vision. All rights reserved. Specifications subject to change without notice. All measurements approximate.