Construction
- Vision's tongue and groove extruded wallplank tube on side walls,
gooseneck nose, and rear doors
- Baked on white enamel finish on tongue and groove wallplank tubes
- Exterior roof corner extrusion, mill finish
- One piece sealed aluminum roof coil
- Tongue and groove extruded roof planks
- Jogless aluminum frame
- Aluminum superplank floor with I-beams on 4-1/2" centers
- Tear drop fenders
- Rubber bumper
- Steel gooseneck subframe
- Heavy duty wiring package and required lighting
- All lighting sealed beam and shock resistant
Interior Lighting
- Interior lights (1 per stall)
- One interior light with switch in dressing room
- One interior light in rear tack
- Three recessed single pole toggle switches mounted in rear posts
Doors and Windows
- Dressing room panel door (camper latch), roadside
- 14x20 window in dressing room door
- Escape tongue and groove and panel door (butterfly latch), roadside
- 22x30 drop down feed windows, roadside (one per stall)
- 14x30 windows (with horse guards), curbside (one per stall)
- 60/40 rear doors (butterfly latches) with 4" removable post
- Two 14x20 windows (with horse guards) in rear doors
- Tie backs on doors
- Two 14x30 windows in nose
Matting
- Floor mats in horse area
- 36" matting at front of stalls
- 48" matting on side and butt walls and rear doors
- Matting on floor of dressing room
Rear Tack (Collapsible)
- 2" removable telescopic saddle rack post
- Solid mount saddle seats (one per horse)
- Five hook bridle rack installed on rear 40% door
|
|
Nose Design
- Tapered arrowhead gooseneck
Running Gear
- Adjustable 2-5/16 cone coupler
- Single speed jack (quick drop leg)
- Two 3500 lb axles (Model 4114)
- Two 5200 lb axles (Model 4118 and Model 4122)
- Two sets electric brakes
- Five 225/75 R15 6 ply tires on silver modular rims (Model 4114)
- Five 235/85 R16 8 ply tires on silver modular rims (Model 4118 and Model 4122)
- Four 15" chrome derby caps
- Spare tire carrier
- Electric breakaway switch and battery pack
Exterior
- Four amber L.E.D. clearance lights (Model 4114)
- Six amber L.E.D. clearance lights (Model 4118 and Model 4122)
- Four red L.E.D. clearance lights
- 3 bar L.E.D. clearance light
- License plate light
- Four L.E.D. signal and tail lights
- Two fender lights
- 7 pole plastic trailer plug
- Two exterior load lights at rear
- Tie loops (1 per horse)
- Four Vision logos
- Side and rear reflective tape (Model 4118 and 4122)
Stalls
- Padded butt and chest strap (first stall across escape door)
- Padded butt and chest strap (across 60% door)
- 91" slant load horse dividers (one per horse less one)
- Two-way forced air roof vents (one per stall)
- Two tie at the front of each stall
Dressing Room
- Bridle rack with ten hooks
- Carpeted brush box
- Tongue and groove and panel slantwall
- Carpet on slantwall
- Carpet on gooseneck drop
- Second location for saddle rack
|
