Construction
- Vision's tongue and groove extruded wallplank tube on side walls,
gooseneck nose, and ramp(s)
- Baked on white enamel finish on tongue and groove wallplank tubes
- Exterior roof corner extrusion, mill finish
- One piece sealed aluminum roof coil
- Tongue and groove extruded roof planks
- Jogless aluminum frame
- Aluminum superplank floor with I-beams on 4-1/2" centers
- Tear drop fenders
- Heavy duty wiring package and required lighting
- All lighting sealed beam and shock resistant
- Steel gooseneck subframe
Interior Lighting
- Two interior lights (1 per stall)
- One interior light with switch in dressing room (Model 2115 and 2323)
- Two recessed single pole toggle switches mounted in rear posts
Doors and Windows
- Escape door (butterfly latch) roadside in horse area
- Escape door (butterfly latch) curbside in horse area (Model 2115)
- Entrance door (camper latch) curbside in dressing room (Model 2115 and 2323)
- 14x20 windows with horse guards in escape doors
- 14x20 window in dressing room door (Model 2115 and 2323)
- Tie backs on side doors
- 54" side ramp curbside with panel curtain door with 1 camlock (Model 2219 and 2323)
- 14x30 window with horse guard in side curtain door (Model 2219 and 2323)
- Rear ramp with panel curtain doors with 2 camlocks
- Two 14x20 windows in curtain doors with horse guards
- Two 14x30 windows in gooseneck nose (one curbside, one roadside)
- Two 18x44 windows with horse guards, 1 in each stall
|
|
Nose Design
- Tapered arrowhead gooseneck
Running Gear
- Adjustable 2-5/16 cone coupler
- Single spped jack (quick drop leg)
- Two 3500 lb axles (Model 2115)
- Two 5200 lb axles (Model 2219 and 2323)
- Two sets electric brakes
- Five 225/75 R15 6 ply tires on silver modular rims (Model 2115)
- Five 235/85 R16 8 ply tires on silver modular rims (Model 2219 and 2323)
- Four chrome derby caps
- Spare tire carrier
- Electric breakaway switch and battery pack
Exterior
- Six amber L.E.D. clearance lights
- Four red L.E.D. clearance lights
- 3 bar L.E.D. clearance light
- License plate light
- Four L.E.D. signal and tail lights
- Two fender lights
- 7 pole plastic trailer plug
- Two exterior load lights at rear
- Two exterior load lights: over side ramp and escape door (Model 2219 and 2323)
- Two tie loops (1 per horse)
- Four Vision logos
- Side and rear reflective tape (Model 2219 and 2323)
Matting
- Floor mats in horse area
- 48" matting on walls and rear ramp
- Matting on floor of dressing room (Model 2115 and Model 2323)
Stalls
- Four padded butt and chest straps
- 76" straight load horse divider with rear leg
- 2" telescopic inside removable post
- Three tie loops (1 each side and 1 on front post)
- Two-way roof vents (1 per stall)
- Full width box stall divider (Model 2219 and 2323)
Dressing Room
(Model 2115 and Model 2323)
- Bridle rack with ten hooks
- Saddle rack mounting track in nose
- Two solid mount saddle seats
- Tongue and groove and panel straightwall
- Carpet on straightwall
|
